Product

Description

Models

Bucket position system

BPS

Contact Axiomatic

Sensors

MVINC-CO-x

Inclinometer module in IP65 casing (IP67 on request). Measuring range -85...+85 degrees or 360 degrees for single axis and +-85 degrees for dual axis version. Fulfills CIA's device profile for inclinometers(DS410). Connections with spring-loaded connectors if PG outlets are used or 4 MIL connectors. Housed in cast-aluminum casing. Power supply 9...35 V.

MVINC-CO-1-180
MVINC-CO-1-360
MVINC-CO-2-180

MVRES-CO-V2 AXRES-CO

Resolver Module with CANopen interface is a robust alternative for an optical encoder. Measuring range 0...359,99 degrees and +-32000 rotations. Useable for instance in boom end positioning in cranes and drilling machines. New slim form factor allows mounting the module inside the joint pin! Fullfils CIA's device profile for single turn absolute encoders (DS406 V3.1). Packed in IP65 rated housing. Power supply 9.. 35V for AXRES-CO-V2 and 9..54VDC for AXRES-CO-SL. CAn be used also as a resolver control module in case that there is already a resolver element in application but no control or interface electronics.

AXRES-CO-V2-1X-H
AXRES-CO-V2-1X-U
AXRES-CO-V2-3X-U
AXRES-CO-1X-SL

MVLRX

Laser receiver module, which can detect a laser beam's position measured from the receiver centerline. Linear measurement area of 190 mm, resolution 3 mm. Can be used for example to read planar laser reference position. CANopen and RS-232 interfaces. Connections with 4 pin MIL connector. Packed in IP65 rated housing. Power supply 9...30 VDC

MVLRX-CO

I/O control units

MVDIO32-CO-x

Digital I/O module. 16 digital inputs (24V, PNP/NPN specified on ordering), 16 digital outputs (24V, 3A max). CAN bus and RS-232 interfaces. Fullfils CIA's device profile for IO devices (DS401).Connections with spring-loaded connectors or PG outlets or MIL- connectors in case that the module is housed in cast-aluminum IP65 rated casing. Power supply 9...28 V.

MVDIO32-CO-PCB
MVDIO32-CO-H-MIL
MVDIO32-CO-H-PG

MVMIO24-CO-x

Multi-purpose I/O module. Contains 8 PWM outputs (3A / channel, 12-bit current feedback), 4 digital outputs (3A / channel), 8 digital inputs (24V, PNP / NPN) and 4 analog 0...5V inputs. CAN bus and RS-232 interfaces.Fullfils CIA's device profile for IO devices (DS401). Connections with spring-loaded connectors. Housed in cast-aluminum casing. Power supply 9...28 V.

MVMIO24i-CO-5V

MVMIO8-CO

Multi-purpose I/O module. Contains 4 inputs, which are individually configurable by software. Analog input 0...10V, 4...20mA (0...20mA). Digital inputs NPN and PNP, 4 PWM / ON-OFF outputs. 5A current handling capability. 0...2000mA proportional solenoid drive, current feedback (12-bit). High-side output, independent power supply for outputs. CAN bus and RS-232 interfaces. Fullfils CIA's device profile for IO devices (DS401). Power supply range 9-35V.

Motor control unit

MCU

Please see http://www.axiomatic.com

HMI units

MVDMi270

The display module is a flexible HMI/ system master module. The default SW installation is with modified Linux operating system. 8 Analog and 32 Digital inputs. 16 Digital (PNP)500 mA outputs. Interfaces; 4xRS-232, 2xCAN 2,0B, 1xUSB 1.0, 1xEthernet, Additional PCMCIA slot available. Graphics controller; C&T 69000 Controller, VGA/XGA Compatible up to 1280x1024, up to 24 bpp, menory 2 Mb. Main processor AMD 586. Operating voltage 9-36V.

MVDMi270

MVLLD

Levelling Led Display module is a simple HMI-module. It is capable to read angular information from CAN-bus or RS232. The standard product is designed to use with MVINC-CO-2 inclinometer module. The module is installed to a rugged cast aluminium housing and has two (2) four pin MIL-style connectors for power supply (9 - 30V...range) and CAN interface.

MVLLD-CO

Protocol converter

MVCANGW

UNDER DEVELOPMENT, NOT AVAILABLE NOW CAN GATEWAY can read measurement data from one bus and send commands to other buses. Protocol exchanger allows connection of three CANbuses with different protocols. Two serial ports are also available for RS-232/422/485 communications. Universal configuration tool enables usage with any existing CAN protocols.

MVCANGW-2